YSYK DEVELOPMENT · FPGA & ADVANCED COMPUTINGEngineering platforms for advanced manufacturing
YYSYKDEVELOPMENT
PRODUCTS / SERIES

Zynq UltraScale+ RFSoC Development Boards

Wideband RF direct sampling, multi-channel data conversion and real-time signal processing.

Zynq UltraScale+ RFSoC Development BoardsZynq UltraScale+ MPSoC Development BoardsFPGA Core BoardsVirtex UltraScale+ Development BoardsFMC Daughter CardsDomestic FPGA PlatformsSoftware IP CoresDigital & Mixed-Signal SystemsStorage & Streaming Systems
PRODUCT SERIES · 9 ITEMS

Products

All Products →
9 products
32-Channel Digital Phased-Array Smart Element
MIC-Quad_67dr_board

32-Channel Digital Phased-Array Smart Element

A high-density smart-array element board for 32-channel all-digital phased-array systems. It combines XCZU67DR and XC7Z020 devices with 32 channels of 14-bit, 2.95-GSPS ADCs and 32 channels of 14-bit, 10-GSPS DACs. Multiple DDR memory banks, QSFP optical connectivity and J30J expansion support multi-channel RF acquisition, beamforming front ends and real-time digital signal processing. Board management is handled through the 7020 device, with JTAG available for debugging.

View Details →
RFSoC-GPU Integrated High-Bandwidth RF Processing Module
MIC-IW-RFSOCZU47DR-GPU

RFSoC-GPU Integrated High-Bandwidth RF Processing Module

An heterogeneous RF and AI processing platform integrating an AMD/Xilinx Zynq UltraScale+ RFSoC XCZU47DR with an NVIDIA Jetson AGX Orin. The RFSoC provides eight 14-bit, 5-GSPS ADC channels and eight 14-bit, 9.85-GSPS DAC channels, alongside PS/PL DDR4 and high-speed QSFP and J30J interfaces. The Orin module provides AI parallel computing for development involving wideband multi-channel radar acquisition, real-time FPGA processing and edge-AI inference.

View Details →
Low-Cost 8-Channel GEN3 Algorithm Evaluation Board
MIC-IWZU47DR_BL1156_8T8R

Low-Cost 8-Channel GEN3 Algorithm Evaluation Board

A GEN3 RF algorithm evaluation platform based on XCZU47DR, providing eight ADC and eight DAC channels with PS/PL DDR4 memory, dual QSFP28, RS422, Ethernet and 12-V input. The reference product page lists a 240 × 200 mm board size. The public page does not specify power consumption or operating temperature for this exact model, so those values are left unlisted pending hardware-manual confirmation. It is intended for development and validation in multiband communications, DOCSIS, test and measurement, electronic-system algorithms and low-orbit satellite carrier monitoring.

View Details →
HyperRF-KCU115 High-Performance Signal Processing Platform
MIC-IW_RFSOC_KU115

HyperRF-KCU115 High-Performance Signal Processing Platform

A high-performance RF acquisition and data-processing platform using a dual-FPGA architecture with KU115 and RFSoC 47DR. It supports eight RF inputs, eight RF outputs and up to four NVMe SSDs. Interfaces include PS/PL DDR4, dual 40G QSFP, dual PCIe x4, 10G SFP, USB 3.0 and Ethernet, with eight GTY transceiver pairs linking the FPGAs. Its modular core-board approach supports heterogeneous integration and compute-intensive signal-processing scenarios such as 8×8 MIMO.

View Details →
2T8R RFSoC Phased-Array Radar Processing Module
MIC-IW-ZU47DR-2T8R

2T8R RFSoC Phased-Array Radar Processing Module

A 2-transmit, 8-receive RF signal-processing module based on the Zynq UltraScale+ RFSoC XCZU47DR. It integrates eight 14-bit, 5.0-GSPS ADC channels and two 14-bit, 9.85-GSPS DAC channels, and supports multi-board cascading. On-board PS DDR4, QSPI Flash and eMMC are complemented by Gigabit Ethernet, JTAG, UART, GPIO and RF data interfaces. It is designed for multi-channel RF acquisition, phased-array radar processing, algorithm evaluation and scalable multi-board deployments.

View Details →
DC-MuxPro Multi-Channel DC Signal Acquisition Card
MIC-IW-RFDC-MuxPro-8TR

DC-MuxPro Multi-Channel DC Signal Acquisition Card

A multi-channel direct-coupled acquisition and processing card based on the XCZU47DR RFSoC, covering DC to 6 GHz for acquisition and transmission of DC and wideband RF signals. The platform integrates PS/PL DDR4 memory, industrial control interfaces and four 100G QSFP optical ports, together with Gigabit Ethernet, USB-JTAG/UART, Micro SD, GPIO and PPS interfaces. Remote firmware updates and maintenance are supported for wideband direct-coupled signal chains and high-speed data systems.

View Details →
4-Channel RFSoC + DSP6678 Signal Acquisition & Processing Module
MIC-IW-RFSOC-DSP

4-Channel RFSoC + DSP6678 Signal Acquisition & Processing Module

A mixed-signal processing module combining an RFSoC with a TI TMS320C6678 DSP. The official English product page confirms DSP6678, PS DDR4, DSP DDR3, Gigabit Ethernet, 40G QSFP, GPIO, RS-422, LVDS and QSPI. It lists a 190 × 135 mm board and an 18–36V DC input. ADC/DAC resolution, sample rates and RF operating range remain subject to hardware-manual verification and are not repeated here without confirmation.

View Details →
16TR RFSoC + x86 Heterogeneous Processing System
MIC-IW_ZU49DR_COME

16TR RFSoC + x86 Heterogeneous Processing System

A heterogeneous platform combining a Kontron COMe-mRP10 x86 module and RFSoC 49DR, interconnected through PCIe Gen4 and Ethernet. It provides sixteen 14-bit 2.5-GSPS ADC channels, sixteen 14-bit 9.85-GSPS DAC channels, dual 100G QSFP and M.2 expansion. Software frameworks cited include MATLAB, LabVIEW and Qt. The source page does not identify the exact x86 CPU model or memory capacity.

View Details →
6U VPX RFSoC + VU13P Signal Acquisition & Processing Module
MIC-IW-6UVPX-RFSOC-VU13P

6U VPX RFSoC + VU13P Signal Acquisition & Processing Module

A 6U VPX signal-processing module integrating an XCZU47DR RFSoC and an XCVU13P FPGA. The RFSoC side provides eight ADC and eight DAC channels, PS/PL DDR4 and 32GB eMMC. The VU13P side offers dual DDR4 SODIMM slots, dual QSFP and FMC expansion. It uses 12V input; the source lists 60W measured power, depending on application.

View Details →