YSYK DEVELOPMENT · FPGA & ADVANCED COMPUTINGEngineering platforms for advanced manufacturing
YYSYKDEVELOPMENT
PRODUCT CENTER

Products

Explore YSYK development platforms, FPGA core boards, FMC modules, software IP and system-level products.

32-Channel Digital Phased-Array Smart Element
MIC-Quad_67dr_board

32-Channel Digital Phased-Array Smart Element

A high-density smart-array element board for 32-channel all-digital phased-array systems. It combines XCZU67DR and XC7Z020 devices with 32 channels of 14-bit, 2.95-GSPS ADCs and 32 channels of 14-bit, 10-GSPS DACs. Multiple DDR memory banks, QSFP optical connectivity and J30J expansion support multi-channel RF acquisition, beamforming front ends and real-time digital signal processing. Board management is handled through the 7020 device, with JTAG available for debugging.

View Details →
Domestic 3U VPX 2T16R RF Acquisition & Processing Module
MIC-IW-SMQZU48DR-2T16R

Domestic 3U VPX 2T16R RF Acquisition & Processing Module

A domestically based 3U VPX RF acquisition and processing module built around the SMQZU48DR-FFBG1760 RFSoC. It integrates 16 channels of 14-bit, 3-GSPS ADCs, two channels of 14-bit, 10-GSPS DACs and an SM53D2GS DSP. A 3U VPX connector and processing-system Ethernet interface support integration into communication and data-processing platforms requiring multi-channel conversion and digital signal processing.

View Details →
RFSoC-GPU Integrated High-Bandwidth RF Processing Module
MIC-IW-RFSOCZU47DR-GPU

RFSoC-GPU Integrated High-Bandwidth RF Processing Module

An heterogeneous RF and AI processing platform integrating an AMD/Xilinx Zynq UltraScale+ RFSoC XCZU47DR with an NVIDIA Jetson AGX Orin. The RFSoC provides eight 14-bit, 5-GSPS ADC channels and eight 14-bit, 9.85-GSPS DAC channels, alongside PS/PL DDR4 and high-speed QSFP and J30J interfaces. The Orin module provides AI parallel computing for development involving wideband multi-channel radar acquisition, real-time FPGA processing and edge-AI inference.

View Details →
Low-Cost 8-Channel GEN3 Algorithm Evaluation Board
MIC-IWZU47DR_BL1156_8T8R

Low-Cost 8-Channel GEN3 Algorithm Evaluation Board

A GEN3 RF algorithm evaluation platform based on XCZU47DR, providing eight ADC and eight DAC channels with PS/PL DDR4 memory, dual QSFP28, RS422, Ethernet and 12-V input. The reference product page lists a 240 × 200 mm board size. The public page does not specify power consumption or operating temperature for this exact model, so those values are left unlisted pending hardware-manual confirmation. It is intended for development and validation in multiband communications, DOCSIS, test and measurement, electronic-system algorithms and low-orbit satellite carrier monitoring.

View Details →
HyperRF-KCU115 High-Performance Signal Processing Platform
MIC-IW_RFSOC_KU115

HyperRF-KCU115 High-Performance Signal Processing Platform

A high-performance RF acquisition and data-processing platform using a dual-FPGA architecture with KU115 and RFSoC 47DR. It supports eight RF inputs, eight RF outputs and up to four NVMe SSDs. Interfaces include PS/PL DDR4, dual 40G QSFP, dual PCIe x4, 10G SFP, USB 3.0 and Ethernet, with eight GTY transceiver pairs linking the FPGAs. Its modular core-board approach supports heterogeneous integration and compute-intensive signal-processing scenarios such as 8×8 MIMO.

View Details →
2T8R RFSoC Phased-Array Radar Processing Module
MIC-IW-ZU47DR-2T8R

2T8R RFSoC Phased-Array Radar Processing Module

A 2-transmit, 8-receive RF signal-processing module based on the Zynq UltraScale+ RFSoC XCZU47DR. It integrates eight 14-bit, 5.0-GSPS ADC channels and two 14-bit, 9.85-GSPS DAC channels, and supports multi-board cascading. On-board PS DDR4, QSPI Flash and eMMC are complemented by Gigabit Ethernet, JTAG, UART, GPIO and RF data interfaces. It is designed for multi-channel RF acquisition, phased-array radar processing, algorithm evaluation and scalable multi-board deployments.

View Details →
DC-MuxPro Multi-Channel DC Signal Acquisition Card
MIC-IW-RFDC-MuxPro-8TR

DC-MuxPro Multi-Channel DC Signal Acquisition Card

A multi-channel direct-coupled acquisition and processing card based on the XCZU47DR RFSoC, covering DC to 6 GHz for acquisition and transmission of DC and wideband RF signals. The platform integrates PS/PL DDR4 memory, industrial control interfaces and four 100G QSFP optical ports, together with Gigabit Ethernet, USB-JTAG/UART, Micro SD, GPIO and PPS interfaces. Remote firmware updates and maintenance are supported for wideband direct-coupled signal chains and high-speed data systems.

View Details →
Zynq UltraScale+ ZU19EG MPSoC Evaluation Board
MIC-IW-ZU19EG-KIT

Zynq UltraScale+ ZU19EG MPSoC Evaluation Board

A heterogeneous-computing evaluation platform based on the Xilinx Zynq UltraScale+ XCZU19EG-FFVB1517 MPSoC. The official product page lists 8GB DDR4 for the PL and 8GB DDR4 for the PS, 2Gb NAND, 2Gb QSPI, one Micro SD interface each for PS and PL, plus USB 3.0, SATA (M.2), CAN, dual Gigabit Ethernet, PCIe Gen3 x1, QSFP+, DisplayPort, Pmod, RS232 and FMC HPC/LPC expansion. The board also provides four PL user DIP switches, four PL user LEDs and PS/PL reset buttons.

View Details →
RFSoC ZU47DR Core Board
MIC-IW_RFSOM_47DR

RFSoC ZU47DR Core Board

An RFSoC ZU47DR core board designed for system integration. High-performance board-to-board connectors expose the RFSoC resources and can reduce the carrier-board design effort. Reference material describes board-level considerations for EMC and RF isolation, as well as PS/PL DDR4, ADC/DAC, NOR Flash and eMMC resources. It can serve as the RF-processing core in CPU, GPU and PCIe-based heterogeneous platforms, custom carrier designs and high-speed signal-processing systems.

View Details →
VU9P Evaluation Board
MIC-IW-VU9P-KIT

VU9P Evaluation Board

An FPGA evaluation platform using the Xilinx Virtex UltraScale XCVU9P-2FLGB2104E. It provides two independent 72-bit DDR4 memory banks (1GB each), PCIe Gen3 x16 / Gen4 x8 host connectivity, and FMCP HPC and FMC HPC expansion connectors. The board includes dual 512-Mbit QSPI Flash, a Xilinx JTAG programming interface, user LEDs and switches, and external PCIe power input. The reference packing list includes a USB Type-C cable and documentation USB drive; the cooling structure is optional.

View Details →
16-Channel RF FMC Daughter Card
MIC-IW-RF16TR-655M

16-Channel RF FMC Daughter Card

A 16-channel RF FMC daughter card for RFSoC platforms, providing 16 differential ADC paths and 16 differential DAC paths through four Carlisle CoreHC2 connectors. Its RF front end includes low-, mid- and high-band balun paths with SMA connections; reference material identifies Mini-Circuits TCM2-33WX+ and Anaren BD-series components. DACIO/ADCIO digital I/O, power rails and an I²C access header support RF-channel expansion and system-level testing.

View Details →
16-Channel Clock Module
MIC-IW-RF16TR-CLK

16-Channel Clock Module

A clock-distribution module providing low-frequency reference clocks for the integrated PLLs used by RFSoC ADCs and DACs. Dedicated low-noise LDO regulators supply 3.3 V to the GP PLL and RF PLL. The module provides I²C control, a TI USB2ANY interface and PLL lock-status LEDs. It supports programmable tracking of a 10-MHz TCXO, an external SMA reference or a PL-recovered clock for synchronized multi-module and multi-board systems.

View Details →
16-Channel RF Loopback Test Module
MIC-IW-RF16TR-N79M

16-Channel RF Loopback Test Module

A 16-channel RF loopback FMC module for RFSoC channel testing, routing 16 DAC outputs back to 16 ADC inputs. Reference material specifies 32 N79 baluns and filters, a 4.7-GHz center frequency and a 4.4–5.0-GHz passband. B46 or N77 band options can be supported through BOM changes or rework. DACIO/ADCIO digital I/O and multiple power rails support converter-chain, channel-consistency and RF loopback validation.

View Details →
VU9P 200G FMC Daughter Card
MIC-VU9P-200G-FMC

VU9P 200G FMC Daughter Card

This product is listed in the reference FMC category. Its detail page only provides the name “VU9P 200G daughter card” and the FMC category; no verifiable interface, electrical, power or dimension specifications are published there. This record preserves a dedicated product entry, with technical specifications pending an official hardware manual.

View Details →
Clock Synchronization Board
MIC-Clock-Sync-Board

Clock Synchronization Board

A clock synchronization and distribution board based on the Xilinx Zynq XC7Z020-2CLG400I. It carries two Micron DDR3 devices forming a 32-bit PS-side memory bus, plus SD Card, dual QSPI Flash, UART, Gigabit Ethernet and fourteen differential clock outputs. Outputs are configured through the LMK04828 and can reach up to 3GHz, using SMA-KHDC3 RF connectors.

View Details →
J30J Expansion Interface FMC Daughter Card
MIC-IW-FMC-J30J

J30J Expansion Interface FMC Daughter Card

A J30J expansion-interface FMC daughter card listed in the reference website’s FMC category. The official detail page confirms model IW-FMC-J30J but does not publish pin mapping, electrical characteristics, board dimensions or compatible carrier-board information. These details remain pending an official hardware manual.

View Details →
RFSoC Wideband Parallel FIR Filter IP
MIC-Wideband Parallel FIR IP

RFSoC Wideband Parallel FIR Filter IP

A polyphase parallel FIR filter IP intended for high-bandwidth RFSoC acquisition-data processing, using 50 groups of tap coefficients. Reference material describes data buffering, coefficient selection, multiplier and adder modules for parallel filtering of high-speed data streams. Exact data width, clock rate, FPGA resource utilization and throughput should be confirmed against the target device and formal IP delivery documentation.

View Details →
16G Bandwidth DDS IP
MIC-16G DDS IP

16G Bandwidth DDS IP

A 16G-bandwidth signal-generation IP using a multi-lane parallel direct digital synthesis (DDS) architecture. The input frequency-control word is decoded into multiple parallel control words, each driving an individual DDS channel to generate the composite signal. Output width, spurious performance, frequency resolution and target-device resource utilization should be taken from the formal IP specification and validation report.

View Details →
19G AWGN Generator IP
MIC-19G AWGN IP

19G AWGN Generator IP

A 19G instantaneous-bandwidth additive white Gaussian noise (AWGN) generation IP based on a VU37P platform. The reference product page specifies a 38-GSPS conversion sampling rate. It is intended for wideband noise generation and receive-chain testing in communications systems, RF receivers and algorithm simulation. Noise amplitude range, statistical accuracy, spectral flatness, random-seed control and FPGA resource utilization are not published on the verified page and are not inferred.

View Details →
Spaceborne 10G Ethernet Switching IP
MIC-10G Ethernet Switch IP

Spaceborne 10G Ethernet Switching IP

A 10G Ethernet switching IP intended for spaceborne and high-reliability data links. Reference material highlights nanosecond-level low latency and high-throughput switching. It can be integrated into high-speed data forwarding, device interconnect and embedded communication systems. Port count, switching capacity, protocol support, buffering architecture and latency test conditions should be confirmed in the specification for the relevant IP version.

View Details →
Multi-Channel Wideband Wireless Channel Emulator
MIC-Wideband Wireless Channel Emulator

Multi-Channel Wideband Wireless Channel Emulator

A multi-channel wideband wireless channel emulator running propagation models on a high-speed parallel FPGA platform. Each channel can independently emulate multipath propagation, Doppler shift, fading, dynamic delay, attenuation, noise, interference and shadowing. Reference specifications list 32 RF channels (16 transmit / 16 receive), a 100MHz–6GHz RF range and 1GHz signal bandwidth. Up to 24 multipath components per channel are supported, with 10µs maximum delay per path and 3ns delay resolution, alongside AWGN, LFM chirp interference and customizable noise sources.

View Details →
QAM Communications IP
MIC-QAM Communication IP

QAM Communications IP

A QAM communications IP for digital modulation and demodulation chains. Reference material lists QAM-256, QAM-64, QAM-16 and QPSK modes, with parameter configuration through an AXI4-Lite interface. Documentation records validation at a 163.84-MHz clock on Zynq platforms. Actual throughput, bit-error performance, resource utilization and interface timing should be confirmed using the test report for the relevant version.

View Details →
Nebula37P-NVMe High-Speed Storage System
MIC-IW-37P-NVME

Nebula37P-NVMe High-Speed Storage System

The Nebula37P-NVMe high-speed storage and streaming system uses an XCVU37P FPGA, integrated 8GB HBM and an array of four M.2 NVMe SSDs for a hardware data path. The product overview states approximately 9.6 GB/s sustained write throughput, while its performance table separately lists 10 GB/s sustained read/write bandwidth; both source figures are retained pending confirmation of configuration and test conditions. The system supports 4TB/8TB/16TB capacity options, dual 100G QSFP28 data interfaces and Gigabit/10-Gigabit Ethernet file access.

View Details →
High-Performance Array Storage System
MIC-Array Storage System

High-Performance Array Storage System

A high-performance array-storage system for 100G RF data acquisition, combining an array server, 100G hardware-acceleration card and NVMe RAID storage. Reference material describes receiving high-speed data generated by ZU48DR and handling acquisition, storage transfer and subsequent playback. Product information lists 8 GB/s write speed, dual 100G QSFP interfaces and multiple PCIe Gen4 x4 M.2 SSDs. Actual capacity and sustained write performance depend on the delivered configuration.

View Details →
S-Band Digital Low-Altitude Bird Detection Radar
MIC-S-Band Digital Bird Detection Radar

S-Band Digital Low-Altitude Bird Detection Radar

An S-band holographic all-digital low-altitude bird-detection radar system for airport airspace awareness. It combines MIMO holographic radar detection with wide-area electro-optical monitoring to obtain target plots, tracks and range, altitude, azimuth and velocity information. The system can support low-altitude electronic fences, risk alerts and airport bird-activity mapping. Detection range, deployment conditions and performance metrics depend on the project configuration and acceptance testing.

View Details →
64-Channel Digital Phased-Array Radar
MIC-64T64R Digital Phased-Array Radar

64-Channel Digital Phased-Array Radar

A 64-channel all-digital phased-array radar platform built around independent digitized transmit/receive channels, with beamforming, scanning and signal processing implemented in the digital domain. Reference product information lists 64 channels of 14-bit ADCs, 64 channels of 14-bit DACs, up to 6-GHz 3-dB bandwidth, 20 100-Gbps QSFP optical interfaces and 8 GB HBM. It is intended for reconfigurable array processing, real-time beam control and high-throughput radar data systems.

View Details →
18GHz Airborne Phased-Array Radar System
MIC-18GHz Airborne Phased-Array Radar System

18GHz Airborne Phased-Array Radar System

An 18-GHz airborne phased-array radar test system comprising an active phased-array antenna subsystem, a 3U VPX signal-processing subsystem, power supply, thermal structure, host test computer and cables. Reference material states that the system supports software customization and laboratory or field trials. Its power subsystem supplies DC 28 V to the antenna array and DC 12 V to the signal-processing subsystem. RF performance, channel configuration and test capabilities are project-specific.

View Details →
4-Channel RFSoC + DSP6678 Signal Acquisition & Processing Module
MIC-IW-RFSOC-DSP

4-Channel RFSoC + DSP6678 Signal Acquisition & Processing Module

A mixed-signal processing module combining an RFSoC with a TI TMS320C6678 DSP. The official English product page confirms DSP6678, PS DDR4, DSP DDR3, Gigabit Ethernet, 40G QSFP, GPIO, RS-422, LVDS and QSPI. It lists a 190 × 135 mm board and an 18–36V DC input. ADC/DAC resolution, sample rates and RF operating range remain subject to hardware-manual verification and are not repeated here without confirmation.

View Details →
16TR RFSoC + x86 Heterogeneous Processing System
MIC-IW_ZU49DR_COME

16TR RFSoC + x86 Heterogeneous Processing System

A heterogeneous platform combining a Kontron COMe-mRP10 x86 module and RFSoC 49DR, interconnected through PCIe Gen4 and Ethernet. It provides sixteen 14-bit 2.5-GSPS ADC channels, sixteen 14-bit 9.85-GSPS DAC channels, dual 100G QSFP and M.2 expansion. Software frameworks cited include MATLAB, LabVIEW and Qt. The source page does not identify the exact x86 CPU model or memory capacity.

View Details →
6U VPX RFSoC + VU13P Signal Acquisition & Processing Module
MIC-IW-6UVPX-RFSOC-VU13P

6U VPX RFSoC + VU13P Signal Acquisition & Processing Module

A 6U VPX signal-processing module integrating an XCZU47DR RFSoC and an XCVU13P FPGA. The RFSoC side provides eight ADC and eight DAC channels, PS/PL DDR4 and 32GB eMMC. The VU13P side offers dual DDR4 SODIMM slots, dual QSFP and FMC expansion. It uses 12V input; the source lists 60W measured power, depending on application.

View Details →
16GB HBM Signal Aggregation Module
MIC-IW_VU47P_QSFPX20

16GB HBM Signal Aggregation Module

A high-speed signal aggregation and processing module based on Virtex UltraScale+ VU47P. The official product page lists twenty QSFP interfaces, dual 64-bit DDR4 interfaces, 4 Gbit NOR Flash, Gigabit Ethernet, a J30J connector and 16 GPIO lines. AMD Virtex UltraScale+ HBM device documentation confirms 16GB of integrated HBM for the VU47P. External DDR4 capacity, per-port QSFP rate and complete pin mapping remain subject to the board hardware manual.

View Details →
Vega13P-100G HyperLink Processing Board
MIC-Vega13P-100G

Vega13P-100G HyperLink Processing Board

A high-speed interconnect processing board based on XCVU13P-FHGB2104. The official product page lists fifteen bidirectional 100G QSFP28 interfaces, 64-bit DDR4 at 2666 MT/s, dual 2-Gbit QSPI NOR Flash, Gigabit Ethernet, USB Type-C and J30J GPIO expansion. FPGA resources are listed as 3,780K logic cells, 12,288 DSP processing units and twelve 100G MAC groups. Board dimensions are 220 × 245 mm; reference measured power is 60 W depending on use, with a stated operating range of −40 to +70 °C.

View Details →
YSYK
FPGA / IP
MIC-IW-7V690T-KIT

Virtex-7 690T FPGA Development Board

A high-speed FPGA development platform based on either the Xilinx XC7VX690T-2FFG1761I or domestic Fudan Micro JFM7VX690T36. The reference product page describes a 40Gb/s platform integrating PCI Express Gen3, DMA IP, 10GBase-R, AXI and an external-DDR3 virtual FIFO controller. The board provides five 10G SFP+ ports, FMC+ expansion and JTAG, with PCIe power input. Optional expansions include FMC, SFP+, HDMI 2K/4K, CameraLink, high-speed AD/DA, M.2 NVMe and SATA cards.

View Details →
All-Domestic 3U VPX High-Speed Signal Transceiver & Processing Board
MIC-IW-3UVPX-100TAI900

All-Domestic 3U VPX High-Speed Signal Transceiver & Processing Board

An all-domestic 3U VPX high-speed signal-processing platform based on the Fudan Micro JFMQL100Tai900, intended for high-speed communications, data centers and embedded signal processing. Reference information lists PS/PL DDR3, QSFP and VPX interfaces, but some memory-capacity descriptions appear inconsistent with device specifications and remain pending hardware-manual confirmation.

View Details →
RD03 Ku-Band Low-Altitude Surveillance Radar
MIC-RD03

RD03 Ku-Band Low-Altitude Surveillance Radar

A Ku-band all-solid-state coherent pulse-Doppler radar using mechanical azimuth scanning and phased-array elevation scanning, with target acquisition and tracking (TAS). The reference source claims a detection range of at least 12km for a 0.01m² RCS target. Actual performance depends on project configuration and acceptance conditions.

View Details →
RD06 X-Band Low-Altitude Surveillance Radar
MIC-RD06

RD06 X-Band Low-Altitude Surveillance Radar

An X-band all-solid-state, fully coherent pulse-Doppler two-dimensional phased-array radar with target acquisition and tracking (TAS). The reference source claims at least 5km detection range for a 0.01m² RCS UAV target, with defined azimuth/elevation coverage and an Ethernet interface. Published figures are not a guaranteed result for every operating scenario.

View Details →
Millimeter-Wave and Terahertz Test & Measurement Equipment
MIC-MMTHZ-TEST

Millimeter-Wave and Terahertz Test & Measurement Equipment

Expansion equipment for signal generation, power measurement and spectrum analysis in millimeter-wave and terahertz systems. Reference material lists 50–1100GHz coverage for signal-source and spectrum-analyzer extensions, plus a power-meter option covering 75GHz–3THz. Frequency-specific modules, output power and measurement range depend on the selected configuration.

View Details →